Feickert Protractor

Perfekt oppsatt pick-up enkelt og greit

Feickert protractoren passer alle platespiller og arm kombinasjoner. Protractoren måler de faktiske forhold og stiller inn pick-up'en perfekt. Enkel og grei å bruke, selv en "nybegynner" kan følge bruksanvisningen og få et mesterlig resultat.

 

 

 

Siste versjon av "skiva/malen" har engelsk tekst. De spesiellt interesserte kan velge om de vil stille inn etter Baerwald eller Loefgren ligningen.

 

Malen kan også brukes til å kontrollere  rotasjons hastigheten på platespilleren.

 

Dynavector

 

 

DV DRT XV-1s

 

 

 

 

Specifications:

Type : Low output moving coil cartridge with multi Alnico magnets and the Flux damper
Output Voltage : 0.3mV (at 1KHz, 5cm/sec.)
Channel Separation : 30 dB (at 1KHz)
Channel balance : 1.0 dB (at 1KHz)
Frequency response : 20 - 20,000Hz (± 1dB)
Compliance : 10 x 10-6 cm/dyn
Tracking force : 1.8 - 2.2 grams
Impedance : R=6 ohms, L=18 micro Henry
Recommended load : resistance > 30 ohms
Cantilever : 6mm length 0.3 mm dia. solid boron
Stylus tip : PF Line contact shape, stylus radius: 7 x 30 micron
Weight : 12.6 grams

 

 

 

 

 

DV DRT XV-1s Mono

 

 

 

 

Specifications:

Type : Low output moving coil cartridge with multi Alnico magnets and the Flux damper
Output Voltage : 0.25mV (at 1KHz, 5cm/sec. RMS horizontal)
Frequency response : 20 - 50,000Hz
Compliance : 6 x 10-6 cm/dyn (horizontal)
Tracking force : 2.6 - 3.2 grams
Impedance : R=7 ohms
Recommended load : resistance > 30 ohms
Cantilever : 6mm length 0.3 mm dia. solid boron
Stylus tip : PF Line contact shape, stylus radius: 7 x 30 micron
Weight : 12.6 grams

 

 

 

 

 

Te Kaitora Rua

 

 

 

 

Specifications:

Type : low output moving coil cartridge with flux damper and alnico magnet
Output Voltage : 0.26mV (at 1KHz, 5cm/sec.)
Channel Separation : 30 dB (at 1KHz)
Channel balance : 1.0 dB (at 1KHz)
Frequency response : 20 - 20,000Hz (± 1dB)
Compliance : 10 x 10-6 cm/dyn
Tracking force : 1.8 - 2.2 grams
Impedance : R=5 ohms
Recommended load : resistance > 30 ohms
Cantilever : 6mm length solid boron
Stylus tip : PF Line contact shape, stylus radius: 7 x 30 micron
Weight : 9.8 grams

 

 

 

 

 

DV XX2 MKII

 

 

 

 

Specifications:

Type : Low output moving coil cartridge with Alnico magnet and Flux damper
Output Voltage : 0.28mV (at 1KHz, 5cm/sec.)
Channel Separation : 30 dB (at 1KHz)
Channel balance : 1.0 dB (at 1KHz)
Frequency response : 20 - 20,000Hz (± 1dB)
Compliance : 10 x 10-6 cm/dyn
Tracking force : 1.8 - 2.2 grams
Impedance : R=6 ohms
Recommended load : resistance > 30 ohms
Cantilever : 6mm length 0.3 mm dia. solid boron
Stylus tip : PF Line contact shape, stylus radius: 7 x 30 micron
Weight : 8.9 grams

 

 

 

 

 

DV 17D3

 

 

 

 

Specifications:

Type : Low output moving coil cartridge with flux damper and softened magnetism
Output Voltage : 0.3mV (at 1KHz, 5cm/sec.)
Channel Separation : 25 dB (at 1KHz)
Channel balance : 1.0 dB (at 1KHz)
Frequency response : 20 - 20,000Hz (± 1dB), 20 - 100,000Hz
Compliance : 15 x 10-6 cm/dyn
Tracking force : 1.8 - 2.2 grams
DC resistance : R=38 ohms
Recommended load : resistance > 100 ohms
Cantilever : 1.7mm length, 0.25dia solid diamond
Stylus tip : Micro-Ridge
Weight : 5.3 grams

 

 

 

 

 

DV 20X H/L

 

 

 

 

Specifications:

Type : High/Low output moving coil cartridge with flux damper and softened magnetism
Output Voltage : 2.8mV / 0.3mV (at 1KHz, 5cm/sec.)
Channel Separation : 25 dB (at 1KHz)
Channel balance : 1.0 dB (at 1KHz)
Frequency response : 20 - 20,000Hz (± 2dB)
Compliance : 12 x 10-6 cm/dyn
Tracking force : 1.8 - 2.2 grams
DC resistance : 150 ohms / 5 ohms
Recommended load : resistance > 1Kohms / > 30 ohms
Cantilever : 6mm length, hard aluminium pipe
Stylus tip : Micro-Ridge
Weight : 8,6 grams

 

 

 

 

 

DV 10X5

 

 

 

 

Specifications:

Type : High output moving coil cartridge with flux damper and softened magnetism
Output Voltage : 2.5mV (at 1KHz, 5cm/sec.)
Channel Separation : 25 dB (at 1KHz)
Channel balance : 1.0 dB (at 1KHz)
Frequency response : 20 - 20,000Hz (± 2dB)
Compliance : 12 x 10-6 cm/dyn
Tracking force : 1.8 - 2.2 grams
DC resistance : 150 ohms
Recommended load : impedance > 1Kohms
Cantilever : 6mm length aluminium pipe
Stylus tip : Elliptical
Weight : 6,6 grams